Question 1

ما هي أنواع صمامات التحكم في درجة الحرارة؟

Accepted Answer

Self-actuated temperature control valve: The main components of the self-actuated temperature control valve are the thermostat and control valve. This temperature control valve is applicable for corrosive liquids, steam, liquid and gas, mainly in the cooling system, to control the temperature. Whenever the temperature of the charging medium rises, the control valve gets closed. It is highly effective and efficient and delivers a high accuracy rate. It is entirely safe and reliable to use the self-actuated temperature control valve. Self-regulated temperature control valve: The self-regulated temperature control valve doesn’t need any power supply and is best suitable for regulating the temperature in the tanks, processing of the streams, and different kinds of equipment. It is made of casting aluminium acting single/double seat or reversely. Electric temperature control valve: An electric temperature control valve is the application of electrical flow inside the control valve to control the temperature. The main working principle of the electric temperature control valve is to control the temperature at the outlet of the equipment through the control of the inlet flow of the exchanger of heat. Or unit of air conditioning or any hot/cold medium. Whenever there is a change in the load, the flow rate automatically adjusts by changing the opening of the electric temperature control valve to eliminate the impact caused by the changes in the load. At last, there is the restoration of the temperature for setting the value.

Question 2

ما هي مشكلات استكشاف الأخطاء وإصلاحها في صمام التحكم في درجة الحرارة والحلول المتعلقة به؟

Accepted Answer

Problems Causes Solutions Difficult to adjust the temperature of mixed water or unable to set the valve The temperature of the inlet is not within the limits The reversal in the supplies of hot and cold Debris inside the strainers and valves Always make sure that the temperature of the inlets is within the range of the valve Fit the valve again inside the supplies of hot/cold along with accurate connectivity Flush out the water throughout the valve Cleaning of all the strainers is essential Instability in the mixed temperature Fouling of the strainers Fluctuations in the supplying of the pressures Clean out all the strainers Installation of the valves for reducing the pressure on the inlets of cold and hot for the moderation of the valve Changing the mix temperature with the passage of time Changes in supplying pressure Debris inside the strainers Installing the valves to decrease the pressure Cleaning of all the strainers Only hot or cold flows from the tap The setting of the valve in an incorrect manner The ability of hot or cold water to cross towards the other outlet Adjusting the mixed temperature between 50 degrees Celsius to 65 degrees Celsius according to the requirement Keep checking the non-return valve if case it gets fouled and clean it needs cleaning No flow from the outlet of the valve Failure in the supply of hot or cold water Blockage in the strainers Restoration of the supplies inside the inlets and checking the temperature of the inlet Fluctuations or reductions in the rate of flow Blockage in the valves or filters of inlet Variations in the supplying pressure Flush or clean all the valves as per requirements Installation of valves for reducing the pressure No changing of the temperature of mixed water during adjustment of the valve Reversal supplies of hot and cold water Fit the valves again along with the supplies of hot and cold in a correct manner Cross flowing of cold or hot water into one another Reversed supplies of hot and cold Fitting of the valves again The valve becomes noisy The high velocity of water Decrease the velocity of water that you achieve by fitting the pressure reducing valves

Question 3

كيف يمكنك الحفاظ على صمام التحكم في درجة الحرارة؟

Accepted Answer

As the recommendation, you must check the temperature control valve once every year to ensure that it is working correctly. If you install the temperature control valve and some unknown water quality, it is essential to check the temperature control valve more often. There can be changes in the temperature of the water from the temperature control valve due to the seasonal changes in the supply of cold water You need to access the strainers for cleaning purposes through the extensive size union connections of the temperature control valve If the quality of the water supply is low, then the strainer of the temperature control valve can block. Install an extra strainer or filter on the cold and hot inlets of the temperature control valve The servicing of the temperature control valve isn’t possible. You can’t disassemble the temperature control valve, and don’t try for it. There is the possibility of removing the strainers for cleaning purposes and snapping on the cap. Always consider the temperature control valve the safety valve, so it is better to replace it at intervals not more than 5 years.

Question 4

ما هي مواصفات صمام التحكم في درجة الحرارة؟

Accepted Answer

The temperature of the cold water supply 5 degrees Celsius to 25 degrees Celsius The temperature of the hot water supply 65 degrees Celsius to 99 degrees Celsius Range of adjusting the temperature of the outlet 50 degrees Celsius to 65 degrees Celsius Factory setting temperature of temperature control valve Approximately 65 degrees Celsius Accuracy of outlet temperature 3 degrees Celsius The minimum difference between the temperature (between the temperature of the outlet and the hot water supply) 15 degrees Celsius Static supply of pressure Maximum 1600kPa Dynamic supply of pressure Maximum 500kPa Unbalancing the pressure supply 2:1 ratio maximum Permitting the changes of the pressure for controlling the temperature at the outlet for supplying the pressure at the outlet Maximum 10% The minimum flow rate of the temperature control valve 4 litres per minute The maximum flow rate of the temperature control valve 23 litres per minute

Question 5

كيف يمكنك ضبط درجة الحرارة في صمام التحكم في درجة الحرارة؟

Accepted Answer

As a priority to adjusting the temperature control valve, switching on the hot water supply heater is essential and delivering according to the recommended temperature. If there is an adjustable thermostat, set the thermostat to 65 degrees Celsius. Ensure that the water heater is that specific temperature before fixing the temperature control valve. Test the mixing water temperature at the closest outlet supplied by the temperature control valve. It would help if you opened the tap to permit the rate of flow minimum of 4 litres per minute. You need to use the thermometer at the outlet nearest to the temperature control valve to make sure that you have achieved the required temperature of the mixed water Permit the water to run once a minute to settle the mixed water temperature after adjusting it every time. To adjust the temperature of the temperature control valve at the outlet, remove the cap to increase the accessibility towards adjusting the spindle. Use some of the unique tools you need to install and change the spindle to receive the required temperature. You need to rotate it clockwise direction to increase the temperature. Anti-clockwise for decreasing the temperature to reach the necessary temperature. After commissioning the temperature control valve, the installer must label the commissioning and fix it with the water heater at a suitable position.

Question 6

ما هي ميزات وفوائد استخدام صمام التحكم في درجة الحرارة؟

Accepted Answer

You can easily integrate the temperature control valve and match it with the size of the pipe The design of the temperature control valve is highly flexible as all the ports are easy to configure depending on the requirements of your installation The whole set-up of the temperature control valve is simple to operate and maintain Suitable for the coolers, condensers and heaters of the products Preheating of the fuel and lube oil Most of the refineries, chemical production and production of oil use temperature control valve Durability and reliability The design of the temperature control valve is compact enough Pressure drop in the temperature control valve is at a minimum level All the functions of the temperature control valve are powerful and quick

Question 7

لماذا من الضروري التحكم في درجة الحرارة؟

Accepted Answer

It is necessary to control the fluids’ engine’s temperature regarding the particular equipment’s efficiency and performance. According to the application, failure to maintain the temperature accuracy can lead to less fuel consumption and high emissions as the output. You must purchase the temperature control valve from leading manufacturers like BCST. Applications using the temperature control valve: Jacket Water (HT): The water temperature of the jacket has an impact on the consumption of fuel and the efficiency of the engine. In this application, it is very important to maintain the temperature for accepting the load as the low temperature can cause cold corrosion that leads to slow steaming. As an additional benefit, you can quickly recover the wasted heat from the innovative valve technology, which helps improve the system’s efficiency. Chargeable Air Cooler (LT): The chargeable air cooler is equipped with control valves, including a temperature control valve. It is for setting the high to medium temperature. The whole structure is built-in along with the highly-efficient coil. It also has a significant impact on the engine’s performance, and different kinds need various temperatures for air inlet depending on the combustion in the correct way. Additionally, you need to control the dew point to reduce the corrosion, optimise the fuel consumption, and reduce the spark in the plug that may foul inside the gas engines. Lube oil: In this application, the inaccurate temperature of the oil can affect the viscosity in a negative manner and the characteristics of the flow. It can lead to the wearing of the engine.

Question 8

من هي الشركات المصنعة لصمام التحكم في درجة الحرارة؟

Accepted Answer

Several countries are the manufacturers of the temperature control valve . It includes the United Kingdom, India and China. Being China on the top, BCST has served the manufacturing industry for more than 22 years. There is a significant impact on the engines from the temperature control valve by BCST. It helps manipulate the temperature of the fluids present in the engine jacket water, compressors and turbines. BCST has established its name as the company that always offers a variety of products such as temperature control valve and many more. You can choose accordingly depending on your industrial application.

Question 9

ما هي العوامل التي يجب مراعاتها عند اختيار صمام التحكم في درجة الحرارة؟

Accepted Answer

The temperature control valve facilitates with the simple methodology regarding the controlling of the fluids’ temperature. It is very important to operate the industrial machineries and processing equipment. The use of temperature control valve is mostly in compressors, turbines, engine jacket water and lubricating the oil in the cooling systems. So, take a look the factors that are helpful in selecting the right temperature control valve for your application: Flow rate: First and foremost, thing is the consideration of the required flow rate for determining the size of temperature control valve. Actuation method: You need to consider the requirements of your applications and objectives when making the decision regarding selection of temperature control valve or actuated control valve. Self-actuation (including the temperature control valve) Externally actuated valves (solution to bring improvement in the processes) Only one time setting of the temperature Flexibly adjusting the temperature Standard temperature range of the control valve Precisely controlling the temperature No need of any additional parts Involvement of whole system including temperature sensor and controller Completely mechanical It needs pneumatic or electrical source for activation purposes Body material: Every material works in a best manner in various applications. Cast ironàthe usage is generally for the oil systems, water and glycol Aluminumàthe cost is low and services suitable for high pressure Ductile ironàstrength is more than steel at economical pricing and best suited for marine applications Stainless steelàresistant to corrosion at highest level Bronzeàsuitable for salt water applications Steelàhigh level of strength and pressure rating Configuration of the flow: The temperature control valve performs good in both diverting and mixing applications. 1) Diverting applications: When you use the temperature control valve for diverting services, the connection of the inlet is with the temperature sensor port and port B along with the cooler by passing the line. 2) Mixing applications: When you use the temperature control valve for mixing purposes, you can use the C port as the inlet port for the cold fluid coming from the cooler. Port B is inlet for the hot fluid and the common outlet is Port A. The port A is the port for sensing the temperature and later it will mix both cold and hot fluids in the accurate portions. This will produce the required temperature at the outlet that exits from the Port A.

درجة حرارة إمدادات المياه الباردة	5 درجات مئوية إلى 25 درجة مئوية
درجة حرارة إمدادات المياه الساخنة	65 درجة مئوية إلى 99 درجة مئوية
نطاق ضبط درجة حرارة المخرج	50 درجة مئوية إلى 65 درجة مئوية
درجة حرارة ضبط المصنع لـ صمام التحكم في درجة الحرارة	65 درجة مئوية تقريباً
دقة درجة حرارة المخرج	3 درجات مئوية
الحد الأدنى للفرق بين درجة الحرارة (بين درجة حرارة المخرج وإمدادات الماء الساخن)	15 درجة مئوية
إمداد ثابت للضغط	1600 كيلو باسكال كحد أقصى
الإمداد الديناميكي للضغط	500 كيلو باسكال كحد أقصى
عدم توازن إمدادات الضغط	نسبة 2:1 كحد أقصى
السماح بتغيرات الضغط للتحكم في درجة الحرارة عند المخرج لإمداد الضغط عند المخرج	الحد الأقصى 10%
الحد الأدنى لمعدل التدفق الأدنى لـ صمام التحكم في درجة الحرارة	4 لترات في الدقيقة
الحد الأقصى لمعدل التدفق الأقصى لـ صمام التحكم في درجة الحرارة	23 لترًا في الدقيقة

التقييم الذاتي (بما في ذلك صمام التحكم في درجة الحرارة)	الصمامات التي يتم تشغيلها خارجيًا (حل لإحداث تحسين في العمليات)
ضبط درجة الحرارة لمرة واحدة فقط	ضبط درجة الحرارة بمرونة
نطاق درجة الحرارة القياسي لصمام التحكم	التحكم الدقيق في درجة الحرارة
لا حاجة لأي أجزاء إضافية	إشراك النظام بأكمله بما في ذلك مستشعر درجة الحرارة ووحدة التحكم
ميكانيكية بالكامل	يحتاج إلى مصدر هوائي أو كهربائي لأغراض التنشيط

Professional Temperature Control Valve Manufacturer

مورد موثوق لصمام التحكم في درجة الحرارة في الصين

BCST - موردو صمامات التحكم في درجة الحرارة الأعلى تقييمًا في الصين

صمام كهربائي للتحكم في درجة الحرارة

صمام التحكم في درجة الحرارة ذاتي التشغيل

صمام التحكم في درجة الحرارة ذاتي التنظيم

BCST Your One Stop Temperature Control Valve Solution Supplier

مراقبة جودة صمام التحكم في درجة الحرارة BCST صمام التحكم في درجة الحرارة

تصميم

فحص المواد الخام

التصنيع

اختبار جزء سبارت

حَشد

فحص التوقعات

اختبار الضغط الهيدروستاتيكي

التعبئة والتغليف

احصل على أحدث الكتالوج الآن!

صمام التحكم في درجة الحرارة -FAQ

Self-actuated temperature control valve:

Self-regulated temperature control valve:

Electric temperature control valve:

Applications using the temperature control valve:

ماء الجاكيت (HT):

مبرد الهواء القابل للشحن (LT):

زيت التشحيم:

معدل التدفق:

طريقة التشغيل:

مادة الجسم:

تكوين التدفق:

1) Diverting applications:

2) Mixing applications:

تواصل معنا