High-Performance Valve Solutions for Every Industrial Challenge

Industry Fields

• Upstream Production: Wellhead choke valves and isolation solutions for high-pressure sour gas and oil wells.
• Natural Gas Processing: Valves for amine treating, dehydration, dew point control, and NGL recovery.
• LNG Liquefaction & Regasification: Cryogenic isolation and control valves for -162°C service in liquefaction trains and send-out systems.
• Crude Oil & Product Pipelines: High-pressure gate, check, and surge relief valves for long-distance transportation.
• Refining Integration: Advanced flow control for crude distillation, FCC, hydrocracking, and coking units.
• Offshore & FPSO: Compact, high-reliability valves designed for topside processing and subsea tie-backs.

Сопутствующие товары

• Cryogenic Trunnion Ball Valve: Zero-leakage isolation for LNG loading arms, bunkering, and cold box applications.
• Metal-Seated Floating Ball Valve: Withstands abrasive sand and high-temperature steam in SAGD and wellhead fracturing.
• Axial Flow Check Valve: Non-slam, spring-assisted design for compressor station discharge and pump protection.
• High-Pressure Control Globe Valve: Cage-guided trim for anti-surge and severe service pressure reduction.
• Поворотный клапан с тройным смещением: Fire-safe, tight shut-off isolation for tank farms and product pipelines.

Case Study: Cryogenic Ball Valve Sealing in LNG Bunkering

Применение: LNG Ship Bunkering System

Specifications: Cryogenic Top-Entry Ball Valve, 8″ (DN200), 300LB.

Условия эксплуатации: Temperature -162°C | Pressure 1.0 MPa.

The Challenge:

After several cool-down cycles, terminal operators detected increasing seat leakage, resulting in boil-off gas loss and heightened safety risks during bunkering operations.

The Diagnosis:

BCST’s service team determined that the original PCTFE seat inserts had suffered from compression set due to thermal contraction, leading to a loss of required contact pressure at cryogenic temperatures.

The Solution:

1. Seat Upgrade: The seat design was re-engineered with spring-energized lip seals, and the lip cross-section was increased from 2mm to 3mm, significantly improving resilience and maintaining constant contact stress at -162°C.
2. Stem Sealing: A live-loaded graphite packing system with a secondary lip seal was implemented to eliminate fugitive methane emissions and ensure stem integrity under thermal cycling.

The Result:

The upgraded valve achieved zero-leakage performance (ISO 15848-1 Class A) and successfully passed 200 full thermal cycle tests without maintenance, guaranteeing safe, reliable operations for the LNG bunkering terminal.

Изучите наши решения

Industry Fields

• Thermal Power Generation: High-pressure valves for boiler feedwater, superheated steam, and condensate systems.
• Combined Cycle & Cogeneration: Attemperator control and bypass valves for HRSG and steam turbine integration.
• District Heating: Pressure-regulating and safety isolation valves for high-temperature hot water networks.
• Hydropower: Large-diameter isolating butterfly and discharge valves for penstock and turbine protection.
• Nuclear Auxiliary Systems: Qualified control and check valves for secondary circuit and service water.
• Renewable Energy (CSP & Geothermal): Valves for molten salt, thermal oil, and geothermal brine with extreme temperature corrosion resistance.

Сопутствующие товары

• High-Pressure Cage-Guided Globe Valve: Severe-service control for boiler feedwater recirculation and startup.
• Поворотный клапан с тройным смещением: Fire-safe, zero-leakage isolation for main steam and turbine bypass lines.
• Metal-Seated Ball Valve: Full-bore, tight shut-off for hot reheat and auxiliary steam isolation.
• Высокопроизводительные поворотные затворы: Reliable throttling and isolation for condenser cooling water and circulating water.
• Axial Flow Check Valve: Non-slam, spring-assisted design for boiler feed pump and condensate extraction pump discharge.

Case Study: Eliminating Cavitation in Boiler Feedwater Recirculation

Применение: Boiler Feedwater Pump Minimum Flow Recirculation

Specifications: Multi-stage labyrinth globe control valve, DN80, 2500LB.

Условия эксплуатации: Inlet Pressure 16.0MPa | Outlet Pressure 0.7MPa, 180°C.

The Challenge:

The original single-seat globe control valve suffered severe cavitation damage after only six months of operation, causing deteriorating flow control and safety risks. Frequent trim replacements were leading to repeated forced unit outages and high maintenance costs.

The Diagnosis:

BCST engineers identified that the entire pressure drop was being dissipated across a single throttling stage, resulting in localized fluid velocities that induced cavitation bubble collapse directly onto the seat and plug.

The Solution:

1. Trim Redesign: The trim was replaced with a 6-stage labyrinth cage. The flow passage size was expanded from 2mm to 4mm, gradually staging the pressure reduction and reducing peak velocity below the cavitation inception threshold.
2. Material Upgrade: The entire trim set was upgraded to solid Tungsten Carbide for extreme cavitation and erosion resistance.

The Result:

The upgraded valve has now operated for over four years without any measurable cavitation damage or loss of performance.

Изучите наши решения

Industry Fields

• Active Pharmaceutical Ingredient (API) Manufacturing: Valves for reactor and vessel isolation with high-purity, crevice-free design.
• Sterile Processing & Bioreactors: Aseptic diaphragm and control valves for fermentation, media transfer, and cell harvest.
• Clean Utilities (WFI & Pure Steam): Sanitary control and sampling valves for Water for Injection, Pure Steam, and Clean-in-Place systems.
• Oral Solid Dosage (OSD): Containment and isolation valves for tablet coating, granulation, and material handling.
• Purified Water & CIP/SIP: Valves designed for full drainage, cleanability, and repeated thermal cycling.
• Secondary Utilities & HVAC: Reliable valve solutions for process steam, nitrogen, and sterile area environmental control.

Сопутствующие товары

• Aseptic Diaphragm Valve: Weir-type design for full drainability and sterile media isolation in bioreactor and WFI loops.
• Sanitary Control Globe Valve: Precision control for WFI temperature regulation, steam sparging, and clean utility distribution.
• Multi-Spring Check Valve: Spring-assisted, crevice-free check valve for clean utility systems and backflow prevention.
• Sanitary Full-Bore Ball Valve: Cavity-filled design for high-purity water and product transfer with minimal hold-up volume.
• High-Purity Butterfly Valve: Lightweight, low-particulate isolation for sterile HVAC and clean boundary applications.

Case Study: Diaphragm Seal Failure in WFI Point-of-Use Valve

Применение: Water for Injection (WFI) Point-of-Use Distribution

Specifications: Weir-type aseptic diaphragm valve, DN25, 150LB.

Условия эксплуатации: 85°C WFI, cyclic steam sterilization at 135°C, 20 cycles per day.

The Challenge:

After only six months of operation, the valve exhibited steam leakage through the diaphragm weep hole, requiring premature diaphragm replacement and raising a critical sterility risk.

The Solution:

1. Material Upgrade: The diaphragm was replaced with an advanced PTFE/EPDM two-piece composite design. The weir geometry was optimized to increase the bend radius from 2.5mm to 4.0mm.
2. Live-Loaded Stem: A Belleville spring stack was integrated into the stem assembly to compensate for thermal relaxation.

The Result:

The upgraded diaphragm valve has now surpassed 50,000 operating cycles with zero leakage and no unscheduled maintenance.

Изучите наши решения

Клапаны BCST отвечают самым высоким международным стандартам безопасности, производительности и надежности.