Professional Pneumatic Butterfly Valve Manufacturer

Pneumatic valves are used in the development of automation or remote-control systems. As such, they are found in all industry sectors, machine tools, chemicals, petrochemicals, medical, pharmaceuticals, food, transport, etc. They also find applications in communities: hot water, air or steam heating, air conditioning, transport of liquid or gaseous fuels, and firefighting.

Цилиндр одностороннего действия

In the single-acting cylinder technique, the cylinder’s single air inlet (located on one end) only allows the piston to push in one direction (opening or closing). The reverse movement is purely mechanical: a spring, compressed during the driving phase, relaxes as soon as the pressure is released.

Цилиндр двойного действия

In the double-acting technique, the jack cylinder has an air inlet at each end. It is, therefore, possible, at leisure, to close, open or regulate the valve’s flow rate by injecting air at one of the ends. The thrust power is independent of maneuver direction, but the management of movements is more complex.

The elementary rules of safety impose to choose with discernment the status of opening of the pneumatic valve in the event of engine air failure. The role of the transported fluid often imposes this choice. In the event of a lack of air, it is preferable, for example, to close the cut-off valve of a fuel supply circuit. If the valve blocks a cooling circuit, it is, on the contrary, more prudent that it remains open. A third option consists in avoiding a sudden variation in the flow rate by blocking the device in the position it occupies when the breakdown occurs.

We keep close contact with customers, and according to customers’ needs, we develop and produce this Lugged Pneumatic Butterfly Valve for your choice. The advantages of lugged butterfly valves include ease of installation and ease of use. Replaceable parts, such as valve body, gasket, and valve plate material, are available to meet your industry needs and provide flexible valve solutions. The advantages of pneumatic actuators are explosion-proof, environmental protection, low cost, and high torque, which can help you improve your project productivity and safety.

• Хорошая герметичность
• Длительный срок службы

The pneumatic butterfly valve is just an ordinary valve device; in order not to affect the operation and prolong the service life, the necessary maintenance is carried out daily. Measurements are essential. So what are the maintenance measures? Regular maintenance is certainly not necessary for daily maintenance. Still, to ensure that the pneumatic butterfly valve can meet the needs of the operation, and will not be taken by surprise, it is not possible to carry out the daily maintenance, and it is necessary to organize the personnel to check regularly. Regular maintenance of pneumatic butterfly valves includes whether the valve is operating normally. Valves used in the control and disposal of fluids and chemical fluids should be checked for corrosion. If there is noise during operation, if the valve is tight, if there is fluid leakage when the valve is closed, etc., the pneumatic butterfly valves used in hydropower plants should likewise be checked for blockage at the valve switch. If there is a blockage, it should be cleared in time; any other way, it will influence the application impact of the pneumatic butterfly valve. It is inescapable that the upkeep and fix of mechanical gear will have weaknesses. As well as routinely halting the cleaning of the pneumatic butterfly valve, it is likewise essential to guarantee that the valve’s fixing execution is excellent, and the presentation of the pneumatic butterfly valve should be checked periodically. The pneumatic butterfly valve suspends equipment and instrument testing. If there are any shortcomings, find maintenance personnel to repair and replace the damaged parts in time. In addition, predictive maintenance work before faults is also significant.

1. Перед установкой убедитесь в отсутствии недостающих деталей дроссельного клапана, правильности типа, отсутствии мусора в корпусе клапана, а также в отсутствии засорения электромагнитного клапана и глушителя.
2. Переведите клапан и цилиндр в закрытое состояние.
3. Установите цилиндр на клапан (направление устройства параллельно или прямо к корпусу клапана), затем проверьте, совпадают ли отверстия под винты; погрешность не должна быть слишком большой. Если есть небольшая погрешность, разверните корпус цилиндра и затяните винты.
4. После завершения установки отладьте работу поворотного клапана. Во время отладки работы необходимо вручную открыть и закрыть электромагнитный клапан (ручное управление после отключения питания катушки электромагнитного клапана не поможет) и изучить процесс открытия и закрытия дроссельного клапана.
5. Если в начале процесса открытия и закрытия клапана во время отладки обнаружится, что клапан работает с трудом, и это нормально, следует уменьшить ход цилиндра (винты регулировки хода на обоих концах цилиндра должны быть одновременно отрегулированы внутрь, а клапан во время регулировки должен работать в открытом положении.

Simplicity is the hallmark of a pneumatic butterfly valve. It consists of a cylindrical body through which the working medium flow is carried out. Inside the space of the case is the disk itself. It is the moving part. The disc can perform rotational movements around the axis, making contact with the body’s surface with a seal, thus blocking the through-hole. The shape of the product may vary in appearance. It can be a disk, either flat or lenticular. Butterfly valves are used for working environments of different nature. Exceptional protection against corrosion is sometimes required, as well as minor wear of structural parts. Most often, for these purposes, system parts are made of stainless steel with a seal in the form of a rubber ring. Conventional valves that do not protect against corrosion and wear are made of carbon or alloy steel. In any case, the body is cast iron. As an option with protection against chemical influences, devices are equipped with elastomeric or rubber inserts placed in the case, and sometimes the disc’s surface is coated with polymeric substances. This protection easily replaces the use of additional pads. As for the connection options with the pipeline, the most common is the coupling. Along the edge of the body are holes into which unique studs are inserted, connecting the pipeline flanges. There are also options for manufacturing structures with their flanges. With their help, the valve is connected to the flanges of the pipeline system.

Заключение

The main advantages of pneumatic butterfly valves are simple structure, small size, lightweight, and low cost. This feature of butterfly valves is particularly noteworthy. It is installed in a dark tunnel at high altitudes. It is convenient to control and operate through a two-position five-way solenoid valve, and it can also adjust the media flow. A pneumatic butterfly valve, also known as a globe valve, is a simple structure conditioning valve. The butterfly valve, which can be used to switch the low-pressure pipeline support, refers to the closing part (disk or butterfly plate) as a disc, which rotates around the valve shaft to achieve the opening and closing. A kind of valve. Valves can control the flow of various fluids such as air, water, steam, corrosive media, mud, oil, liquid metal, and radioactive media. The main effect of blocking and throttling on the pipeline. The opening and the closing part of the butterfly valve is a disc-shaped butterfly plate. Place your order of пневматический поворотный клапан now. You can also contact our technical staff for any assistance; email us at info@bcstgroup.com or call us at our number +86-15052699328.