BCST: Fabricante de válvulas de mariposa excéntricas triples sin fugas

When specifying a Triple Offset Butterfly Valve, trust is paramount. Every BCST valve is built to exceed industry standards in our ISO 9001 certified factory. We hold crucial certifications including API 609, API 607 Fire Safe, and CE, guaranteeing our products are suitable for the most demanding services in oil & gas, chemical processing, and power generation. This commitment to certified quality is a core advantage of partnering with BCST.

Datos técnicos completos y herramientas interactivas para ayudarle a seleccionar la válvula perfecta para su aplicación.

Guía de selección de materiales

Elija el material adecuado para su aplicación en función de la temperatura, la presión y la compatibilidad con el medio.

Datos dimensionales

Tabla interactiva de datos dimensionales basada en las normas GB/T 12221-2005.

DN	Presión	Tipo de oblea (mm)	Tipo de brida (mm)
DN50	PN 1.6~2.5	43	108
DN65	PN 1.6~2.5	46	112
DN80	PN 1.6~2.5	46	114
DN100	PN 1.6~2.5	52	127
DN125	PN 1.6~2.5	56	140
DN150	PN 1.6~2.5	56	140
DN200	PN 1.6~2.5	60	152
DN250	PN 1.6~2.5	68	165

Selección del tipo de accionamiento

Elija el tipo de actuador adecuado en función de sus requisitos operativos.

Normas de fabricación y certificaciones

Las válvulas BCST se fabrican conforme a las normas internacionales y nacionales chinas.

Selecting a triple offset butterfly valve for high-pressure or high-temperature service is a critical decision. But did you know that choosing the wrong body style can complicate installation, prevent necessary maintenance, and compromise safety?

The main types of triple offset butterfly valves are defined by their body construction: Lug, Wafer, Double Flanged, and Butt-Weld ends. The choice depends on your installation needs, pressure requirements, and whether the valve needs to serve as a dead-end isolation point.

I often discuss this with project engineers like Hassan. He views the valve body as more than just a pressure vessel; it’s a key part of the piping design. He once told me, “Emily, the valve’s performance is sealed by its triple offset geometry, but its function in the system is defined by its body style. Choosing a wafer style when you need end-of-line service is a fundamental design error.

This is because different body types interact with the pipeline flanges in very different ways. The right choice ensures not only a proper seal but also the safety and serviceability of the entire unit for years to come.

¿Qué es una válvula de mariposa de triple offset?

Are you concerned about needing to perform maintenance on a pipeline without shutting down the entire system? A standard valve might not allow this, forcing a complete and costly outage for a simple repair on one section.

The Lug-type butterfly valve is the solution for this problem. Its body has threaded lugs that allow it to be bolted to one pipe flange at a time. This design allows it to be used for dead-end service, isolating the downstream piping for maintenance.

The key feature of a lug-style valve is the set of threaded inserts, or “lugs,” cast into the valve body. This allows you to connect the valve to each pipe flange with a separate set of bolts. In a standard installation, bolts will pass through both flanges and the valve. But the real advantage comes when you need to isolate a part of the system. You can remove the downstream piping while the valve remains bolted to the upstream flange, holding back the process fluid. This makes it invaluable for applications where regular maintenance is expected.

Hassan frequently specifies lug-style valves for utility connections and equipment tie-ins because they provide a safe and reliable point of isolation without needing a second valve, saving space and cost.

Característica	Descripción
Diseño	El cuerpo de la válvula tiene orejetas roscadas para atornillar.
Instalación	Puede atornillarse a cada brida independientemente.
Ventajas clave	Adecuado para servicios sin salida y aislamiento de tuberías.
Uso común	Aplicaciones de alta presión; sistemas que requieren un mantenimiento frecuente.

¿Qué es una válvula de mariposa de triple offset tipo wafer?

Are you looking for a more compact and cost-effective valve for a straightforward isolation task? A heavier or more complex valve might be overkill, taking up unnecessary space and budget in your piping design.

The wafer-type butterfly valve is a compact and lightweight option that is “sandwiched” between two pipe flanges. It relies on long through-bolts that clamp the entire assembly together, making it a simple, space-saving, and economical choice for many applications.

A wafer valve is the essence of simplicity. It has no lugs; instead, it has alignment holes and is held in place by the compression of the flange bolts that extend from one flange to the other, clamping the valve in between. This design makes the valve lighter and often more affordable than a lug-style valve. Because of its slim profile, it is an excellent choice for systems where space is tight.

However, this design has a significant limitation: it cannot be used for dead-end service. If you need to remove the downstream piping, there is nothing to hold the valve in place, and you would need to shut down the entire line. I see these valves used extensively in long, straight pipe runs where isolation for maintenance isn’t a primary concern, such as water distribution or HVAC systems.

Característica	Descripción
Diseño	Un cuerpo delgado sujeto entre dos bridas de tubo mediante pernos pasantes.
Instalación	“Sandwiched” between pipe flanges.
Ventajas clave	Ligero, compacto y rentable.
Limitación	No puede utilizarse para un servicio sin salida.

¿Cuándo necesita una válvula de doble brida o soldada?

Are you dealing with very large pipe sizes or extremely high pressures where lug and wafer styles may not be suitable? In these critical service conditions, ensuring a robust and secure connection is the highest priority.

For very large diameters or critical, high-pressure applications, double flanged and butt-weld end valves provide the most rigid and secure connection. A double flanged valve bolts independently to each pipe flange, while a butt-weld valve becomes an integral, leak-free part of the pipeline.

These styles are for the most demanding jobs. A double flanged valve has two sets of flanges as part of the valve body itself. Each valve flange is bolted to its corresponding pipe flange with its own set of bolts. This creates an extremely strong and rigid connection, often preferred for very large and heavy valves. It also allows for dead-end service, similar to a lug valve.

Butt-weld end valves take this a step further. These valves have no flanges at all. Instead, the ends of the valve are beveled and are welded directly to the ends of the pipe. This creates a completely leak-proof, continuous connection that is as strong as the pipe itself. Hassan specifies butt-weld valves for the most critical, high-temperature, and high-pressure steam services where zero leakage and maximum structural integrity are non-negotiable.

Estilo de carrocería	Descripción	Lo mejor para
Doble brida	La válvula tiene sus propias bridas que se atornillan a las bridas de la tubería.	Tuberías de gran tamaño, aplicaciones de alta presión.
Soldadura a tope	Los extremos de la válvula se sueldan directamente a la tubería.	Aplicaciones de máxima integridad, vapor, requisitos de cero fugas.
Top-Entry	Permite acceder al interior de la válvula por la parte superior.	Aplicaciones críticas que requieren mantenimiento en línea.

Conclusión

Elegir el cuerpo de válvula de mariposa de triple offset adecuado es crucial para el rendimiento del sistema. Utilice el estilo orejeta para servicios sin salida, el estilo oblea para necesidades compactas y rentables, y la doble brida o soldadura a tope para las aplicaciones más críticas de alta presión.